Product Technical Spec.
Body Material:
Steel, stainless
Body Style:
Standard round c
Shoulder Diameter:
Between 1.3115 inches and 1.3120 inches
Pilot Diameter:
Between 0.8745 inches and 0.8750 inches
Overall Length:
2.4700 inches
Flange Diameter:
Between 1.4320 inches and 1.4370 inches
Flange Thickness:
0.0930 inches
Undercut Diameter:
1.3120 inches
Undercut Width:
0.0780 inches
Shaft Diameter:
0.1870 inches single shaft and 0.1872 inches single shaft
Shaft Length:
0.5400 inches single shaft
Fragility Factor:
Moderately rugged
Maximum Tempurature Rise:
20.0 degrees celsius
Stator Input Voltage Rating In Volts:
90.0
Stator Input Current Rating:
90.0 milliamperes
Stator Input Electrical Power Rating:
900.0 milliwatts
Frequency In Hertz:
400.0
Zso Impedance Magnitude In Ohms:
Between 870.00 and 1150.00
Zso Impedance Angle In Deg:
Between 79.00 and 85.00
Zrs Impedance Magnitude In Ohms:
Between 195.00 and 290.00
Zrs Impedance Angle In Deg:
Between 27.00 and 37.00
Phase Shift Angle In Deg:
5.500 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
32.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
60.00
Electrical Error Angular Range In Minutes:
-6.0/+6.0
Spline Tooth Quantity:
21 single shaft
Torque Gradient Per Angular Deg:
0.070 inch-ounces
Alignment Hole Quantity:
4
Pilot Length:
0.0400 inches
Shoulder Length:
0.1320 inches
Mounting Surface To Terminal End Distance:
1.9300 inches
Spline Tooth Diametral Pitch:
120 single shaft
Shaft Thread Series Designator:
Unf single shaft
Shaft Thread Direction:
Right-hand single shaft
Shaft Thread Length:
0.2000 inches single shaft
Shaft Type:
Spline w/threads single shaft
Alignment Hole Depth:
0.1250 inches
Transformation Ratio:
1.154 rotor to stator
Alignment Hole Bolt Circle Diameter:
1.1000 inches
Shaft Thread Size:
0.190 millimeters single shaft
Test Data Document:
81349-mil-s-20708 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Terminal Type And Quantity:
6 screw
Specification Data:
81349-mil-s-20708-16 government specification
Item Name:
Synchro,differential Transmitter
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
Part Number:
M20708-16-001
